Norris Glassmate - Underbench Glasswasher

Norris Glassmate - Underbench Glasswasher

The Norris Glassmate is a tough, Australian-made underbench glasswasher for pubs, bars and clubs where glasses need to turn around fast. Its 30 second quick cycle cleans up to 800 glasses an hour, and a selectable cold rinse cools glasses so they are ready to use sooner. It comes in a 10 amp version for premises with limited power, or a 15 amp version, at the same price; compared with the Madison IM17 it has a faster cycle and hot and cold rinse, while the IM17 adds automatic rinse aid and a pump-out drain.

Key features:

• 30 second quick cycle, cleaning up to 800 glasses per hour
• Selectable hot and cold rinse for faster glass turnaround
• Automatic detergent injection for consistent results and controlled use
• Rinse temperature controlled by a thermostop function
• Suitable for low water pressure areas
• Double-skinned door to reduce heat and noise
• High-grade stainless steel welded cabinet with adjustable legs to suit your bench
• Simple push-button and dial controls
• Made in Australia by Norris

Specifications:

• Model: Norris Glassmate (part 17-600 for 10 amp, 18-000 for 15 amp)
• Output: up to 60 loads per hour (depending on incoming water temperature)
• Usable wash height: 265mm
• Dimensions: 505 W x 545 D mm; 700 mm high (700–880 mm on its adjustable legs); 845 mm deep with the door open
• Water use: 6 litres per cycle
• Rinse temperature: 82–88°C
• Power: 240V 50Hz, 10 amp or 15 amp version
• Water connection: 1/2 inch BSP, cold and hot
• Drain: 32mm gravity drain (drain pump optional)
• Included: 1 wire glass rack (17 x 14 inch), 2 water connection hoses, chemical weight and filter, operating manual

Good to know before you buy:

• Power options: choose the 10 amp version if your premises only has standard 10 A power points, or the 15 amp version for a 15 A outlet. Both are the same price. Have a licensed electrician check your outlet and circuit.
• Water and drain: it uses both cold and hot water connections and a gravity drain, connected by a licensed plumber. Norris specifies 10 L/min at 200–400 kPa. We supply the equipment only.
• Drain pump: the standard drain is gravity. If your drain point is higher than the machine outlet, ask us about the optional Norris drain pump.
• Rack size: it takes a 17 x 14 inch glass rack, not a 500 x 500mm dishwasher rack.

Compare similar models:

• Norris Madison IM17: 15 amp glasswasher with automatic rinse aid, pump-out drain and 305mm wash height
• Norris Madison Bantam: 10 amp underbench dishwasher with a 500 x 500mm rack for plates
• Norris Madison IM5: 15 amp underbench dishwasher with automatic rinse aid

Common questions:

10 amp or 15 amp?
Both wash the same way and cost the same. The 10 amp version is made for premises where the power supply is limited to 10 amps; if you have a 15 A outlet, choose the 15 amp version.

Does it add rinse aid?
No. It has automatic detergent injection only. If you want automatic rinse aid, look at the Madison IM17.

Do you install it?
We supply the equipment only. It must be connected by a licensed plumber in your area, and your electrician should confirm the power outlet.

See all our commercial glasswashers.

Warranty: 2 years on the whole machine and 5 years on the cabinet, from Norris. Exclusions apply.