Commercial Upright Dishwashers

Commercial upright dishwashers, also called pass through or hood type dishwashers, are the workhorse of restaurant, hotel and club kitchens. Racks slide in from one side, the hood comes down, and a clean, sanitised load slides out the other side in as little as a minute. Choose from Norris, including the Madison IM7 and IM20 and Australian-made AP, BT and FI ranges, plus Fagor and Asber. Priced below RRP with Australia-wide delivery.

Skip to results list

Filters

19 items
Column grid

Active filters:

Column grid

Filter

Active filters:

How a pass through dishwasher works

A pass through dishwasher sits between a dirty dish inlet bench and a clean dish outlet bench. Staff scrape and rinse dishes on the inlet side, slide a full rack in, lower the hood and the machine runs automatically. When the cycle ends, they lift the hood and push the rack out onto the outlet bench to dry. It is fast, ergonomic and keeps dirty and clean dishes separate.

How to choose an upright dishwasher

Throughput

The Fagor CO-142BDD washes up to 65 baskets an hour (around 1,170 dishes) with 55, 75 and 120 second cycles. The Norris AP750 and AP2500 wash up to 1,080 plates an hour. The Asber GE-H500DD handles up to 40 baskets an hour and has a continuous cycle. Size the machine to your busiest service.

Hood clearance

Check the tallest items you wash, like trays, GN pans and stock pots. The Fagor CO-142 models have a 440mm opening suitable for GN 1/1 trays, and the Norris AP2500 has a 470mm washable opening for larger items.

Heat recovery and condensers

Every time the hood lifts, a cloud of hot steam comes out. Heat recovery and condenser models, like the Fagor CO-142HRSBDD and Madison IM20 with condenser, capture that steam and reuse its heat, making the dish area more comfortable and cutting energy use.

Controls

The Madison IM20 is available with a top control panel, which is easy to see and reach when the machine sits in a corner or between benches.

Power and plumbing

Upright dishwashers draw more power than underbench models, and many need a 3-phase supply. Check the electrical requirements on each product page, and plan the water, drain and power connections before installation.

Made to order Norris models

The Norris AP, BT and FI ranges are made to order in Australia. Click Get a Quote on these models for current pricing and delivery timing.

Complete your dish area

A pass through dishwasher works best with a matching inlet bench (often with a sink and pre-rinse) and an outlet bench. See our Dishwasher Benches & Inlet Sinks.

Adler pass through dishwashers

We also stock Adler pass through dishwashers made in Italy: the ECO1000, in single or three phase, and the Topline TOP1200 with 4 wash cycles, both taking 500 x 500mm racks.

Delivery, warranty and our price-beat guarantee

We deliver Australia-wide by tailgate truck, usually within 2 to 5 business days to Melbourne, Sydney, Brisbane and Adelaide and 4 to 12 days elsewhere. Every machine comes with the manufacturer's warranty, and prices are shown ex GST with the GST-inclusive price alongside. Found a lower price? Send us the link under our Price-Beat Guarantee and we'll send you a one-off discount code.

Upright dishwasher FAQs

Is a pass through dishwasher the same as a hood type dishwasher?

Yes. Pass through, hood type and upright dishwasher all describe a machine with a lifting hood that racks pass through.

Can it be installed in a corner?

Yes. Most pass through dishwashers can be set up straight through or as a corner installation, with the inlet and outlet benches at right angles. Check the product details for your model.

Do you deliver Australia-wide?

Yes. We deliver to every state by tailgate truck. Installation by a licensed plumber and electrician is required.

Related categories