Norris AP750 - Upright Passthrough Dishwasher
SKU: AP750
Prefer to talk? Call 0447 483 035 Mon–Fri, 9am–5pm (Sydney time)
Before it arrives
- Size: about 640 W x 635 D x 1516 H mm. Check doorways and access on the way in.
- Power: three phase, 20 amps per phase. Three-phase power needs a licensed electrician to connect.
We supply the equipment only. Connection and installation are by your own licensed trades. Full specifications are in the product details below.
Product details
Norris AP750 - Upright Passthrough Dishwasher
The Norris AP750 is an Australian-made "Fast Response" pass-through dishwasher from Norris's AP series, designed to connect to cold water so it is never held up waiting for your hot water system. It suits busy restaurants and cafes, with Norris rating it at up to about 1,080 plates an hour (up to 45 loads) and 470mm of usable wash height for large plates and platters. The AP2500 is its more powerful sister with a 1600 W wash pump, and Norris's electromechanical FI 750 shares the same footprint.
Key features:
- Connects to cold water, so there is no dependence on a hot water system
- Up to about 1,080 plates per hour (depending on incoming water)
- 470mm usable wash height
- Norris AWC electronic controller with touchscreen
- Glass, plate and pot cycles plus a manual cycle for baked-on soil
- Automatic detergent and rinse aid pumps, adjustable through the control board
- Drain pump fitted as standard
- Hood safety cut-out system and recirculating wash system
- Optional Norris steam condenser available
Specifications:
- Model: Norris AP750
- Output: up to 45 loads per hour
- Usable wash height: 470mm
- Dimensions: about 640 W x 635 D x 1516 H mm (same footprint as the Norris FI 750)
- Water use: about 2.5 litres per cycle
- Power: three phase, 20 amps per phase
- Water connection: cold water, 1/2 inch BSP tap, 10 L/min at 200–400 kPa
- Drain: drain pump; drain connection within 1 metre
- Made in Australia
Good to know before you buy:
- Power: Norris's manual calls for a 20 amp per phase, three-phase supply within 1 metre of the machine. It must be connected by a licensed electrician. We supply the equipment only.
- Water and drain: it connects to a cold water tap and needs a drain point within 1 metre, connected by a licensed plumber.
- Ordering: this model is built to order by Norris and is no longer shown on Norris's current website. Contact us and we will confirm the current specification before you buy.
Compare similar models:
- Norris AP2500: the more powerful AP model with a 1600 W wash pump
- Norris FI 750: electromechanical model on the same footprint, also on cold water
- Norris BT2000 AWC: Australian-made three-phase pass-through on hot water
- Norris Madison IM20: imported pass-through, up to 1,000 plates per hour
Common questions:
Why cold water?
The AP750 heats its own water, so you don't wait for a hot water system to recover in busy periods.
Can I add a steam condenser?
Yes. Norris makes an optional steam condenser designed for the FI 750, AP750 and AP2500. Ask us for details.
Do you install it?
We supply the equipment only. It must be connected by a licensed electrician and a licensed plumber in your area.
See all our commercial upright dishwashers.
Warranty: 2 years parts and labour, plus 5 years on the AWC control board, from Norris. Exclusions apply. We will confirm the current warranty terms with Norris when you order.
Customer reviews
No reviews yet. Bought this from us? Tell other buyers how it’s going.