Norris BT2000 AWC - Upright Passthrough Dishwasher

Norris BT2000 AWC - Upright Passthrough Dishwasher

The Norris BT2000 AWC is the largest of Norris's Australian-made BT Advanced Wash Control pass-through dishwashers, for busy restaurants, cafes and compact commercial kitchens. Norris rates it at up to about 1,080 plates an hour (around 55 loads), with a 1.2 horsepower three-phase wash pump and 450mm of usable wash height. It is the step up from the BT700, with more washing power and a taller wash chamber.

Key features:

• Up to about 1,080 plates per hour (depending on incoming water temperature and pressure)
• 1.2 horsepower three-phase wash pump
• 450mm usable wash height
• Norris Advanced Wash Control (AWC) electronic controller
• Glass, plate and pot cycles plus a manual cycle
• Automatic detergent and rinse aid dosing
• Recirculating wash system using about 3 litres per cycle
• Corner or in-line positioning; optional drain pump

Specifications:

• Model: Norris BT2000 AWC
• Rack size: 500 x 500mm; usable wash height 450mm
• Dimensions: about 665 W x 730 D x 1520–1570 H mm
• Water use: about 3 litres per cycle
• Power: three phase
• Water connection: 1/2 inch BSP hot water tap, hot water held at 50–65°C, 10 L/min at 200–400 kPa
• Drain: drain connection within 1 metre; drain pump optional
• Made in Australia

Good to know before you buy:

• Power: it runs on three-phase power and must be connected by a licensed electrician, who should size the supply from the Norris installation manual and check the wash pump turns the right way on start-up. We supply the equipment only.
• Water and drain: it needs a hot water system that can hold 50–65°C at the machine, plus a drain within 1 metre, connected by a licensed plumber.
• Ordering: this model is built to order by Norris and is no longer shown on Norris's current website. Contact us and we will confirm the current specification before you buy.

Compare similar models:

• Norris BT700 AWC: smaller three-phase model, up to about 700 plates per hour
• Norris BT600 AWC: single-phase 15 amp model, up to 600 plates per hour
• Norris AP2500: Australian-made pass-through that connects to cold water, 470mm wash height
• Norris Madison IM20: imported pass-through, up to 1,000 plates per hour

Common questions:

Will it take large platters and trays?
It has 450mm of usable wash height and takes 500 x 500mm racks, so it suits large plates, platters and many trays. Check your largest items against those figures.

Does it need hot water?
Yes. Norris's manual calls for a hot water system holding 50–65°C at the dishwasher.

Do you install it?
We supply the equipment only. It must be connected by a licensed electrician and a licensed plumber in your area.

See all our commercial upright dishwashers.

Warranty: 2 years parts and labour, plus 5 years on the AWC control board, from Norris. Exclusions apply. We will confirm the current warranty terms with Norris when you order.