Norris Madison IM7 - Upright Passthrough Dishwasher

Norris Madison IM7 - Upright Passthrough Dishwasher

The Norris Madison IM7 is a compact upright pass-through dishwasher for smaller restaurants, cafes and bars that have outgrown an underbench machine. Norris calls it the "little brother" of the IM20: it cleans up to 700 plates an hour (up to 40 loads) and uses about 2.7 litres of water per cycle. Compared with the IM20, it has a smaller 500 W wash pump and 8 kW boiler, a 390mm usable wash height and a lower 16 amp per phase supply, in the same 634mm wide body.

Key features:

• Up to 700 plates per hour (depending on incoming water temperature and pressure)
• 1, 2, 3 and 12 minute wash cycle options
• Automatic detergent and rinse aid injection
• About 2.7 litres of water per cycle
• Self-diagnostic system
• Thermostat function makes sure the set rinse temperature is reached
• Easy-to-clean pressed wash chamber and stainless steel exterior
• Ergonomic pass-through design, European-designed for Australian conditions

Specifications:

• Model: Norris Madison IM7 (Norris part 25-900-2)
• Output: up to 40 loads per hour
• Rack size: 500 x 500mm; usable wash height 390mm
• Dimensions: 634 W x 745 D mm (725 x 810 mm including handle); 1455–1515 mm high on legs, 1890–1950 mm with the hood raised
• Wash tank 15 litres at 60°C; boiler 6 litres (8 kW), rinse at 82°C
• Wash pump: 500 W
• Power: 400V 50Hz three phase plus neutral, 16 amps per phase
• Water connection: 3/4 inch BSP hot water, 10 L/min at 200–400 kPa
• Drain: gravity (drain pump optional)
• Included: plate rack and cup rack (500 x 500mm), cutlery container, drain hose, water hose, operating manual

Good to know before you buy:

• Power: it needs a three-phase supply and must be connected by a licensed electrician. We supply the equipment only.
• Water and drain: it connects to hot water and drains by gravity, connected by a licensed plumber. If your drain point is higher than the outlet, ask us about the optional Madison drain pump.
• Benches not included: pass-through machines are usually set up between inlet and outlet benches, which are not included.
• Height: allow up to 1950mm for the hood to open.

Compare similar models:

• Norris Madison IM20: up to 1000 plates per hour, 440mm wash height, 20 amps per phase
• Norris BT600 AWC: Australian-made pass-through on 15 amp single phase power
• Norris Madison IM5: underbench dishwasher on a 15 amp outlet

Common questions:

IM7 or IM20?
The IM7 suits smaller venues, with up to 700 plates an hour on a 16 amp per phase supply. The IM20 handles up to 1000 plates an hour, has a taller 440mm wash height and a rinse pump, and needs 20 amps per phase.

Does it come with racks?
Yes. It comes with a plate rack, a cup rack and a cutlery container. Ask us about extra racks or benches.

Do you install it?
We supply the equipment only. It must be connected by a licensed electrician and a licensed plumber in your area.

See all our commercial upright dishwashers.

Warranty: 2 years parts and labour, plus 3 years on the control board and cabinet, from Norris. Norris extends this to 4 years on the whole machine when Zexa ware-washing chemicals are used consistently (proof of purchase may be required). Exclusions apply.