Norris Madison IR120 - Rack Conveyor Drying Unit
Contact us for current pricing and lead times. Click Get a Quote below.
Norris Madison IR120 - Rack Conveyor Drying Unit
This is the Norris Madison IR120 rack conveyor dishwasher supplied with its drying unit, for high-volume kitchens that are tight on space and want washware to come out dry and ready to use. It works in three stages, wash, rinse and dry, at up to 120 racks an hour. Norris says the drying unit dries washware fast and reduces steam and heat in the kitchen; the standard IR120 has the same wash and rinse stages without the dryer.
Key features:
- Wash, rinse and dry in one pass, up to 120 racks per hour (depending on incoming water temperature)
- Drying unit reduces ambient steam and heat in the kitchen
- Powerful 10,500 W wash tank element
- Double-flow wash pump and a rinse pump to maintain rinse pressure
- Rapid-recovery boiler for faster turnaround
- 3 wash cycle options and recirculating wash system
- Rinse temperature controlled by a thermostop function
- Double-skinned door insulation and deep-drawn tank construction
- Available as left-hand or right-hand exit
Specifications:
- Model: Norris Madison IR120 with drying unit (Norris part 26-120-LE-DU left exit or 26-120-RE-DU right exit)
- Output: up to 120 racks per hour
- Rack size: 500 x 500mm; usable wash height 430mm
- Washer dimensions: 1150 W x 775 D mm; 1585–1645 mm high on legs (the drying unit adds to the overall length)
- Water use: 160 litres per hour
- Wash tank 70 litres (10.5 kW) at 60°C; rinse tank 17 litres (9.5 kW), rinse at 82°C
- Pumps: 1500 W wash, 200 W rinse
- Power: 400V 50Hz three phase plus neutral; 63 amps including the dryer (Norris figure)
- Water connection: 3/4 inch BSP hot water, 10 L/min at 200–400 kPa; drain: gravity
- Included with the washer: plate rack and flat rack (500 x 500mm), cutlery container, drain hose, water hose, operating manual
Good to know before you buy:
- Space: Norris does not publish the overall length with the dryer for the IR120. Contact us and we will confirm the full footprint before you plan your layout.
- Power: Norris lists 63 amps with the dryer, on 400V three phase. It must be connected by a licensed electrician. We supply the equipment only.
- Water and drain: it connects to hot water and drains by gravity, connected by a licensed plumber. Detergent and rinse aid injection are not built in, so plan a dosing system with your chemical supplier.
- Exit direction: choose left or right exit when you order.
Compare similar models:
- Norris Madison IR120: the same conveyor without the drying unit, 1150mm long
- Norris Madison IR200 with Drying Unit: up to 200 racks per hour with pre-wash and drying
- Norris Madison IR200: up to 200 racks per hour without the dryer
Common questions:
Is this just the drying unit?
No. It is the IR120 rack conveyor supplied with its drying unit (Norris parts 26-120-LE-DU and 26-120-RE-DU).
Why add a dryer?
Washware comes out dry and ready to use, and Norris says the dryer reduces steam and heat in the kitchen.
Do you install it?
We supply the equipment only. It must be connected by a licensed electrician and a licensed plumber in your area.
See all our commercial rack conveyor dishwashers.
Warranty: 2 years parts and labour, plus 3 years on the control board and cabinet, from Norris. Norris extends this to 4 years on the whole machine when Zexa ware-washing chemicals are used consistently (proof of purchase may be required). Exclusions apply.
