Norris Madison IR200 - Rack Conveyor Drying Unit
Contact us for current pricing and lead times. Click Get a Quote below.
Norris Madison IR200 - Rack Conveyor Drying Unit
This is the Norris Madison IR200 rack conveyor dishwasher supplied with its drying unit, for high-volume kitchens that want crockery to come off the line clean, dry and ready to use. It works in four stages, pre-wash, wash, rinse and dry, at up to 200 racks an hour, and the dryer speeds up turnaround in busy periods. With the dryer fitted the machine is 2568mm long, compared with 1971mm for the IR200 on its own.
Key features:
- Pre-wash, wash, rinse and dry, up to 200 racks per hour (depending on incoming water temperature)
- Drying unit delivers dry washware ready for immediate use
- Two 1500 W wash pumps
- Two 70 litre wash tanks with deep-drawn construction
- Recirculating wash system
- Double-skinned door to reduce noise
- Simple push-button operation
- Available as left-hand or right-hand exit
Specifications:
- Model: Norris Madison IR200 with drying unit (Norris part 26-200-LE-DU left exit or 26-200-RE-DU right exit)
- Output: up to 200 racks per hour
- Rack size: 500 x 500mm; usable wash height 430mm
- Dimensions with dryer: 2568 W x 775 D mm; height 1795–1855 mm with the dryer (Norris spec sheet)
- Water use: 270 litres per hour
- Wash tanks 2 x 70 litres (10.5 kW) at 60°C; rinse tank 17 litres (15.5 kW), rinse at 82°C
- Power: 400V 50Hz three phase plus neutral; 63 amps with the dryer (40 amps per phase without)
- Water connection: 3/4 inch BSP hot water, 10 L/min at 200–400 kPa; drain: gravity
- Included with the washer: plate rack and flat rack (500 x 500mm), cutlery container, drain hose, water hose, operating manual
Good to know before you buy:
- Access and space: at 2568mm long with the dryer, plan the delivery route and your layout carefully, including loading and unloading space at each end. Delivery is by tailgate truck to the front of your premises.
- Power: Norris specifies 63 amps with the dryer on 400V three phase. It must be connected by a licensed electrician. We supply the equipment only.
- Water and drain: it connects to hot water and drains by gravity, connected by a licensed plumber. Detergent and rinse aid injection are not built in, so plan a dosing system with your chemical supplier.
- Exit direction: choose left or right exit when you order.
Compare similar models:
- Norris Madison IR200: the same conveyor without the drying unit, 1971mm long
- Norris Madison IR120 with Drying Unit: compact conveyor with dryer, up to 120 racks per hour
- Norris Madison IR120: compact 1150mm conveyor without dryer
Common questions:
Is this just the drying unit?
No. It is the IR200 rack conveyor supplied with its drying unit (Norris parts 26-200-LE-DU and 26-200-RE-DU).
Why add a dryer?
Everything coming off the conveyor is dry and ready to use, which speeds up turnaround in busy periods.
Do you install it?
We supply the equipment only. It must be connected by a licensed electrician and a licensed plumber in your area.
See all our commercial rack conveyor dishwashers.
Warranty: 2 years parts and labour, plus 3 years on the control board and cabinet, from Norris. Norris extends this to 4 years on the whole machine when Zexa ware-washing chemicals are used consistently (proof of purchase may be required). Exclusions apply.
