A pizza prep fridge is built around one job: holding a row of toppings in a refrigerated pan rail above a deep cutting board, with chilled storage underneath. A sandwich or salad prep fridge uses the same layout with a narrower work area and a well sized for fillings, while a saladette is a compact counter with a lidded pan well, suited to cafés and smaller kitchens.
The right one depends on your menu. Pizzerias need a wide pan rail, a deep board and often storage for 600 × 400 mm trays. Sandwich bars need plenty of pans and a long work surface. A small café can often manage with a 900 mm saladette, or a countertop ingredient well on an existing bench fridge.
This guide compares the types in our food prep station range, then covers pan layouts, lids, doors versus drawers, sizes and ambient ratings.
The main types of prep station
Pizza prep fridges
These have a raised refrigerated pan rail at the back, a deep cutting board in front and refrigerated cabinets below. Examples include the Glacian HPB1152, HPB1815 and HPB2476 (5, 9 and 12 × GN 1/3 pans), the FED Thermaster TPB1200 and TPB1800 (6 and 9 × GN 1/3 pans included, under insulated hinged stainless steel lids) and the Thermaster TSB735 and TSB1555, which hold 8 and 16 × 1/6 poly pans with a 290 mm deep cutting board at 910 mm bench height.

The Glacian HPB1815 two-door pizza prep fridge takes 9 × GN 1/3 pans under sliding polycarbonate covers and is rated for kitchens up to 43°C.
Stone-top pizza benches
Some pizza benches swap the cutting board for a stone worktop and leave the topping rail as a separate unit. The Saltas MPB0030 granite-top pizza prep fridge has a granite worktop with a 200 mm splashback, shelves that take 600 × 400 mm trays, and takes a VRX refrigerated topping unit on top (sold separately). Its sibling, the MPB0026, adds a set of non-refrigerated drawers for 100 mm deep 600 × 400 trays. The FED-X XPZ3600TND has a marble worktop over a bench fridge, described in its listing as a naturally cool surface for stretching dough, and pairs with the FED-X XVRX countertop salad bars.
Sandwich and salad prep counters
These put a pan well and cutting board at bench height, often with a lid or canopy over the pans. The FED-X XSS7C13S2V takes 7 × GN 1/3 pans up to 150 mm deep across 1360 mm, and the Thermaster SCB/18 and SCB/21 sandwich bars hold 9 and 11 × GN 1/3 pans in an enclosed well with easy-slide covers, a 230 mm deep work area and an 855 mm bench height. Atosa's MSF8305, MSF8306 and MSF8308 "mega top" models come with 1/6 pans and can take full-size GN 1/1 pans, a layout Atosa pitches at noodle bars as well as sandwich and salad prep.
Saladettes
Saladettes are compact counters with a lidded pan well and worktop. Examples include the Atosa ESL3800 (900 mm wide, a sliding lid, 6 × GN 1/3 plus 3 × GN 1/6 pans 100 mm deep), the FED-X XGNS900D (900 mm, 5 × GN 1/6 under a hinged stainless lid, 240 L of storage below) and the Thermaster TL1200TN-9P to TL1800TN-15P (9 to 15 × GN 1/3 openings, just 800 mm high).
Countertop ingredient wells
These sit on an existing bench or on top of a prep counter. The Anvil VRX and FED-X XVRX ranges are 395 mm deep and hold 4 to 9 × GN 1/3 pans across 1200–2000 mm, with either a glass canopy or stainless steel lids. The Atosa ESL3880 to ESL3890 take GN 1/3 or GN 1/4 pans 100 mm deep under a glass sneeze canopy.
Side-by-side comparison
| Type | Top layout | Pans (examples) | Widths in our range | Best suited to |
|---|---|---|---|---|
| Pizza prep fridge | Raised pan rail, deep cutting board | 5–12 × GN 1/3 (Glacian), 8–16 × 1/6 (Thermaster TSB) | 735–2476 mm | Pizzerias building many pizzas to order |
| Stone-top pizza bench | Granite or marble worktop; add a topping unit | Depends on the topping unit you add | 2020–2025 mm | Stretching dough on the bench |
| Sandwich/salad prep counter | Pan well plus cutting board, often lidded | 7–11 × GN 1/3 | 698–2180 mm | Sandwich bars, salad and noodle bars |
| Saladette | Lidded pan well plus worktop | 5 × GN 1/6 to 15 × GN 1/3 | 900–1800 mm | Cafés and smaller kitchens |
| Countertop ingredient well | Pan well only, canopy or lids | 4–9 × GN 1/3 | 1200–2005 mm | Adding cold pans to an existing bench |
GN pan layout and counts
Prep stations are sized in Gastronorm (GN) pans. A full GN 1/1 pan is 530 × 325 mm, and the smaller sizes are fractions of it: 1/3, 1/4, 1/6 and 1/9. Smaller pans give you more separate ingredients in the same width, which suits menus with lots of low-volume toppings. Larger pans hold more of each ingredient between refills.
Three details are easy to miss:
- Pan depth: some wells take pans up to 150 mm deep (the FED-X XSS counters, Thermaster PWB180 and FED-X XVRX), others 100 mm (the Atosa ESL saladettes and countertop units). Deeper pans hold more per refill.
- Whether pans are included: the Thermaster TPB1200 and TPB1800 and the Atosa MSF8301 to MSF8303 come with pans. The Glacian, FED-X and Atosa ESL models don't, so budget for pans and lids.
- Flexibility: Glacian supplies spacer bars for 1/6 and 1/9 pans, and the pan well lifts out for cleaning. The FED-X XGNS900S takes a mix of GN 1/1, 1/3 and 1/6 pans.
Our tip: Write down every topping or filling you'll hold on the line at your busiest service, with the pan size each one needs, before you compare models. Then choose a well with one or two spare positions for specials, rather than one that is full on day one.
Lids, covers and canopies
Cover options in our range include insulated hinged stainless steel lids (Thermaster TPB), sliding polycarbonate covers (Glacian), easy-slide Perspex covers over a tilted pan rail (Thermaster PWB180 and PWB200), sliding lids (Atosa ESL3800 and ESL3850) and hinged stainless lids (FED-X XGNS900D). Keep them closed during quiet periods so the well isn't working against open air.
Glass canopies, such as those on the FED-X XS903GC and the Anvil VRX1500, put the ingredients on show and suit counters customers can see. Stainless lids are the simpler choice behind the scenes. Check the clearance above, too: the Anvil VRX1200S stands 630 mm high with its lid raised, which matters under a shelf. Atosa also makes double-tier overshelves to suit its MSF and MPF prep tables.
Under-bench storage: doors or drawers
Doors are the simpler, cheaper option, and what you can fit behind them varies. The FED-X counters have a GN 1/1 compatible shelf per door. A Glacian door takes 2 × GN 1/1 pans or a GN 2/1 pan lengthways. The Saltas benches, the Atosa EPF pizza tables and the FED-X XPZ3600TND take 600 × 400 mm trays.
Drawers bring ingredients out to you without bending to reach the back of a cabinet. Drawer versions in our range include the Glacian HPB2476DDD, the FED-X XSS7C18S3V-6D (six heavy-duty drawers) and the FED-X XPZ3600TND (two doors plus seven shallow drawers). Some door models, such as the FED-X XSS7C13S2V, can take optional drawer kits in place of the doors.
Drawers cost more. Comparing like-for-like pairs, the drawer version costs roughly $1,200–$1,350 more (ex GST, at the time of writing, October 2026): the Glacian HPB2476 against the HPB2476DDD, and the FED-X XSS7C18S3V against the XSS7C18S3V-6D.
Widths, depths and placement
Widths in our range start at 698 mm (Atosa MSF8301) and 735 mm (Thermaster TSB735) and go up to 2476 mm (Glacian HPB2476). Depth varies too:
- about 700 mm for most saladettes and the FED-X sandwich counters;
- 760–840 mm for most pizza prep fridges, and the Glacian cutting board increases overall depth to 830 mm;
- 335–395 mm for countertop ingredient wells.
Check ventilation before you push a unit into a corner. The Atosa MSF, MPF and EPF models need 100 mm of clearance for air ventilation. The Atosa ESL saladettes have the compressor and condenser at the bottom and can be placed against a wall, as can the FED-X XGNS models.
Some benches are heavy (the Saltas MPB0030 weighs 296 kg), and standard delivery is by tailgate truck to the front of the premises, so check doorway sizes on the product page and plan the move inside.
Ambient rating: the heat near the oven
Prep stations often sit close to a pizza oven or the cooking line, so the ambient rating (the room temperature the unit is designed to cope with) matters. In our range:
- 43°C: Glacian HPB models, Thermaster TPB1200 and TPB1800, FED-X XSS and XPZ counters, Atosa ESL saladettes and EPF pizza tables;
- 38°C: FED-X XGNS900D and XGNS1300S, FED-X XS903GC and the Anvil VRX wells;
- 32°C: Thermaster TSB735 and TSB1555, FED-X XGNS1300E and XGNS900S, and the FED-X XVRX countertop bars.
If the station will be near a commercial pizza oven, a higher rating gives you more margin on hot days. Also check the cooling type. Fan-driven "blown" wells (Thermaster SLB and SCB) push chilled air across the pans, while static models such as the Atosa ESL saladettes use manual defrosting, and Atosa recommends defrosting them regularly.
Many prep stations run from a standard 10 A power point, including the Thermaster TPB1200 (500 W), Thermaster TSB1555 (400 W) and FED-X XSS7C18S3V-6D (320 W). Check the spec sheet, and have a licensed electrician add any new outlet.
Frequently asked questions
What's the difference between a pizza prep fridge and a sandwich prep fridge?
Both have a refrigerated pan well over chilled storage. Pizza prep fridges usually have a deeper cutting board (290 mm on the Thermaster TSB range) and storage for 600 × 400 mm trays, while sandwich prep fridges have a narrower work area (230–235 mm on the Thermaster SCB and SLB).
What is a saladette?
A compact refrigerated counter with a lidded pan well and worktop on top and refrigerated storage below, typically 700 mm deep. Models in our range run from 900 mm to 1800 mm wide.
Do prep fridges come with GN pans?
Some do, including the Thermaster TPB1200 (6 × GN 1/3) and the Atosa MSF8301 to MSF8303. Many don't, so check the listing and budget for pans and lids.
Granite, marble or stainless steel top for pizza?
It depends on how you work. Granite and marble tops give you a stone surface for working dough, while stainless steel tops and polyethylene cutting boards suit assembling to order. Stone-top benches are also much heavier, so plan delivery and placement.
Can I add a refrigerated topping rail to an existing bench?
Yes. Countertop ingredient wells like the Anvil VRX and FED-X XVRX sit on an existing bench. The Saltas benches take a VRX topping unit, and the Atosa EPF pizza tables can take the ESL3889 or ESL3890 countertop unit.
See the full range of pizza, sandwich and salad prep stations, or pair a saladette with extra undercounter fridges for bulk storage. If you're unsure which layout suits your menu, ask us a product question, or request a quote for a full pizzeria or sandwich bar fit-out.


