Modular Systems DSB7-1800L/A - Premium Stainless Steel Double Sink Bench, Left Bowls, 1800 x 700mm

Modular Systems DSB7-1800L/A - Premium Stainless Steel Double Sink Bench, Left Bowls, 1800 x 700mm

The DSB7-1800L/A has two 450 x 450 mm bowls at the left-hand end and a long stainless bench running to the right, handy for racking up washed pots, trays and utensils. At 1800 x 700mm it is a step up from the 1500mm version when you need more landing room. Premium range features include welded 300 mm deep bowls, a 150 mm splashback, stainless legs and a tubular pot undershelf.

Key features:

• Two fully welded 450 x 450 mm bowls, 300 mm deep, polished inside and out, set at the left-hand end
• 90 mm drain hole in each bowl
• 1.2mm 304 (18/8) stainless steel top with a 15 mm wet edge, lined with 15 mm XPS board and a stainless steel panel
• Stainless steel U-channel reinforcement under the top, with more channels on longer benches
• 150 mm high, 40 mm thick stainless steel splashback, bevelled and fully enclosed
• 4 x 42 mm stainless steel legs with fully adjustable polished disc feet
• Tubular stainless steel pot undershelf, or a leg brace instead at no extra cost when requested on the order
• Lockable castor kits available
• Flat-packed with an instruction manual and tools for quick, simple assembly

Specifications:

• Model: Modular Systems DSB7-1800L/A
• Dimensions: 1800 W x 700 D x 900 H mm
• Weight: 45.2 kg
• Bowls: 2, each 450 x 450 mm, 300 mm deep, fully welded, 90 mm drain holes
• Bowl position: left-hand end
• Benchtop: 1.2mm SUS304 (18/8) stainless steel, lined with 15 mm XPS board
• Splashback: 150 mm high, 40 mm thick
• Legs: 4 x 42 mm, 1.2mm stainless steel, adjustable polished disc feet
• Pot undershelf: 1.2mm stainless steel (18/8), 38 mm outer frame tubes, 25 mm inner tubes at 40 mm spacing
• Supplied: flat-packed, with instruction manual and tools
• Packed size for delivery: 770 x 1870 x 530 mm

Good to know before you buy:

• Access: it comes flat-packed in a carton about 1870 mm long, 770 mm wide and 530 mm high (the bench itself weighs 45.2 kg). Delivery is by tailgate truck to the front of your premises and does not include carrying it inside or unpacking, so plan to move it in and assemble it on site. Check doorways and tight corners on the way in.
• Water / drain: the bowls must be connected to water and drainage by a licensed plumber. We supply the equipment only.
• Undershelf or leg brace: the tubular pot undershelf is standard. A leg brace can be supplied instead at no extra cost if it is requested on the order, so tell us when you order.
• What's included: an instruction manual and tools come with the bench. Taps are not included.

Compare similar models:

• Modular Systems DSB7-1800R/A: same size, bowls on the right and bench space to the left
• Modular Systems DSB7-1800C/A: same size, bowls in the centre with bench space on both sides
• Modular Systems DSB7-1500L/A: shorter 1500mm bench, same bowl size
• Modular Systems 1800-7-DSBL: Economic version with 250 mm deep bowls, a 100mm splashback and galvanised legs and undershelf

Common questions:

Which end are the bowls at?
Facing the bench, the DSB7-1800L/A has its bowls at the left-hand end, with the bench space to the right. If you need it the other way round, choose the Modular Systems DSB7-1800R/A.

Does it come with taps?
No. Taps are not included. Each bowl has a 90 mm drain hole, and your plumber can fit the waste and tapware to suit.

Do you install it?
We supply the equipment only. It must be connected to water and drainage by a licensed plumber in your area.

See all our stainless steel sink benches.

Warranty: 2 years on parts only. Labour is not covered.