Sammic M-5 - Compact Stainless Steel Potato Peeler, 5kg Load

Sammic M-5 - Compact Stainless Steel Potato Peeler, 5kg Load

The M-5 is a compact abrasive potato peeler with a stainless steel body and a BPA-free transparent lid. It takes 5 kg per load and peels 80 to 100 kg an hour, and it also handles carrots and similar vegetables. At 333 mm wide it suits small cafes, food trucks, delis and kitchens short on space. It is the smallest peeler in our Sammic range: the aluminium PP-6+ and the stainless PI models take bigger loads.

Key features:

• Stainless steel body with a BPA-free transparent lid
• Suited to small spaces, with a 333 x 367 mm footprint
• Also peels carrots and other similar produce
• Base plate lined with a highly resistant, long-lasting abrasive
• Integral control panel with on and off push buttons and a 0 to 6 minute timer
• Water inlet system with a non-return air break
• Optional stainless steel stand with a removable filter chamber

Specifications:

• Model: M-5
• Dimensions: 333 W x 367 D x 490 H mm (without stand)
• Dimensions with stand: 425 W x 555 D x 965 H mm
• Weight: 16 kg
• Electrical: 0.35 kW, 230 V, single phase, 10 amp plug
• Load: 5 kg per cycle
• Output: 80 to 100 kg per hour
• Timer: 0 to 6 minutes
• Plate speed: 300 rpm
• Packed size: 420 x 420 x 570 mm, 19 kg
• Made in: Spain

Good to know before you buy:

• Power: plugs into a standard 10 amp power point.
• Water: needs a water connection and drain, connected by a licensed plumber.
• Stand and filter: this listing is for the peeler only. The stainless steel floor stand and the no-foam filter are optional extras; ask us for a price.
• Delivery: sent by courier. Check bench space for a 333 x 367 x 490 mm unit, about 16 kg.
• Installation: the water supply and drain must be connected by a licensed plumber. We supply the equipment only.

Compare similar models:

• PP-6+: a cast aluminium peeler with a 5 to 6 kg load and 120 to 150 kg an hour, in a larger 395 x 700 mm footprint.
• PI-10: stainless steel, 10 kg per load and 200 to 240 kg an hour, with an IP65 control board and continuous running.
• PP-12+: cast aluminium, 10 to 12 kg per load and 220 to 300 kg an hour.

Common questions:

Where should it go in my kitchen?
Sammic suggests placing it near a sink for drainage, since it needs a drain and a water supply. It can sit on the bench, or on the optional stand (965 mm high with the peeler on it), which comes with a removable filter chamber.

How does abrasive peeling work?
The base plate spins at 300 rpm and the potatoes rub against its abrasive lining, which takes the skin off. The timer sets how long each batch runs, and the clear lid lets you check progress.

Is it Watermark approved?
Sammic's price list doesn't state Watermark approval for the M-5, while it does for the PP and PI models. If your plumber needs it, ask us to confirm before you order.

See all our vegetable prep machines.

Warranty: 2-year parts and labour warranty from Sammic Australia, on site.