B+S Black CCF-HP1 - 800mm Hi Pac Gas Wok Table 1 Hole

B+S Black CCF-HP1 - 800mm Hi Pac Gas Wok Table 1 Hole

The B+S Black CCF-HP1 is a single hole Hi Pac wok table for high output kitchens, or small kitchens where space is tight. B+S says one Hi Pac can do the work of 2 to 3 hole wok cookers. This is the plain 800 mm model. The CCF-HP1+1R and CCF-HP1+1L add a rear pot and prep table in 1200 mm, and the CCF-HP1S is the same wok built lower to suit a range line.

Key features:

• Durable cast iron ring, 335 mm diameter
• Low noise stainless steel air forced burner, twist off for easy cleaning
• Ceramic lined combustion chamber to increase cooking speed
• No deck cooling needed, with a multi layered insulated pressed top deck, 1.5 mm thick
• German made pilot and self-diagnostic system, automatic ignition and flame failure status indicators
• Lever action gas control for flame modulation, plus a manual laundry arm and spindle
• Front waste gutter and waste shovel, with front access to all components

Specifications:

• Model: CCF-HP1
• Dimensions: 800 W x 950 D x 1300 H mm
• Gas: 135 MJ/h natural gas, 165 MJ/h LPG
• Electrical: 10A 240V, 1.2 m plug
• Water inlet: 1/2 inch copper
• Waste: 2 inch BSP male
• Gas connection: 3/4 inch BSP male
• Supply pressure: 0.9 kPa natural gas, 2.3 kPa LPG
• Regulator: supplied inbuilt, in the combination control valve
• Gas approval: GMK 10700

Good to know before you buy:

• Gas type: choose Natural Gas or LPG when you order, to match your gas supply.
• Installation: gas appliances must be connected by a licensed gas fitter, to local regulations and under a suitable exhaust canopy. The water and waste connections also need a licensed plumber. You will need a 10A 240V power point too, for its 1.2 m plug. We supply the equipment only.
• Access: delivered by tailgate truck to the front of your premises. Check doorways for an 800 x 950 x 1300 mm unit.
• Options: B+S also offers left and right side wings, a joining strip, a knee valve and a wok holder. Ask us for a price.

Compare similar models:

• B+S Black CCF-HP1S: same burner and rating, built to range height at 840 x 1030 mm
• B+S Black CCF-HP1+1R: 1200 mm with a right rear pot and side prep table
• B+S Black CCF-HP1+1L: 1200 mm with a left rear pot and side prep table
• B+S Black CCF-HP2+1: 1800 mm with two holes, a pot and a prep table

Common questions:

Hi Pac or a standard waterless wok table?
The Hi Pac has an air forced burner rated at 135 MJ/h on natural gas and needs a power point. The 600 mm UFWWD-1 runs on gas alone at 105 to 110 MJ/h and takes less width, with your choice of burner.

Which gas gives the higher rating?
LPG, at 165 MJ/h against 135 MJ/h on natural gas.

Is there anywhere to keep water warm?
Not on this model. If you want a pot built in, the 1200 mm models have a 12 L rear warming pot.

See all our commercial wok burners.

Warranty: 24-month B+S parts and labour warranty, from the date of installation.