Williams Banksia HSP3UBA - 1 Door White Colorbond Prep Counter Fridge With Flat Blown Air Well 1120mm 250L

Williams Banksia HSP3UBA - 1 Door White Colorbond Prep Counter Fridge With Flat Blown Air Well 1120mm 250L

The Williams Banksia HSP3UBA takes three full-size 1/1 GN pans, 150mm deep, in a flat blown-air well, so it suits kitchens that prep in bulk, such as salad, noodle or bowl bars, caterers and cafes that portion from large pans. The well holds +1°C to +4°C with refrigerated air over and under the pans, and 250 litres of chilled storage sits behind a self-closing solid door. It is made in Australia, 1120mm wide, and runs from a 10 amp plug. The HSP5UBA is the longer version with five 1/1 pans, the HSP18UBA has an angled well for 18 x 1/6 pans instead, and the HSP3UBASS is this counter in stainless steel.

Key features:

• Flat blown-air well with 3 x 1/1 GN pans (150mm deep) included
• Refrigerated air over and under all pans, in a fully enclosed stainless steel well
• 250 litres of storage behind a self-closing solid door with a plastic-coated shelf
• Holds +1°C to +4°C, with a high ambient rating for hard-working kitchens
• CoolSmart electronic controller for even temperatures and energy efficiency
• Square glass canopy with rear sliding polycarbonate covers (With canopy option), plus a 10mm polypropylene cutting board
• 4622 grade stainless steel worktop and removable blown-air ducts for easy cleaning
• Forced-air refrigeration in a removable cassette, with a front-mounted condenser and washable filter
• Waste heat recovery vaporiser, so no drain is needed; swivel and brake castors, threaded for a changeover to legs

Specifications:

• Model: Williams HSP3UBA (HSP3UBA-000-N without canopy)
• Capacity: 250 litres
• GN pans included: 3 x 1/1 GN, 150mm deep
• Dimensions: 1120 W x 880 D x 937 H mm (on castors)
• Weight: 160 kg unpacked
• Temperature range: +1°C to +4°C
• Refrigerant: R134a
• Power: 10 amp plug, 4.2 A running current, 2 m power cable
• Door: 1 self-closing solid door with 1 plastic-coated shelf
• Finish: white Colorbond interior and exterior (excluding underside), stainless steel internal floor and prep area
• Cutting board: polypropylene, 10mm thick
• Origin: designed and made in Australia

Good to know before you buy:

• Canopy: Williams requires a canopy on Banksia counters, fitted by Williams or others. Choose With canopy for the square glass canopy with rear sliding covers. If you choose Without canopy (HSP3UBA-000-N), you must fit your own, or the warranty is affected.
• Access: the counter is 1120mm wide, 880mm deep and 937mm high on castors, and weighs 160 kg. It is delivered by tailgate truck to the front of your premises, so check doorways and the route in.
• Power: plugs into a standard 10 amp power point with a 2 m cable. No electrician is needed.
• Airflow: keep the front condenser grille clear and wash the filter regularly. Allow a duct opening for the condenser exhaust if the counter is built into joinery.
• Drain: none needed. The vaporiser evaporates defrost water.

Compare similar models:

• Williams HSP3UBASS: the same flat-well counter in stainless steel
• Williams HSP5UBA: 500 litres with a flat well for 5 x 1/1 GN pans, 1800mm wide
• Williams HSP18UBA: same size with an angled well for 18 x 1/6 GN pans in two depths
• Williams HJ1PCBA: Jade Pizza counter with 5 x 1/3 GN pans, 150mm deep, and 400 litres

Common questions:

Can I use smaller pans in the well?
The counter comes with three 1/1 GN pans, 150mm deep. Williams lists different pan modules as an option for its prep counters, so ask us if you want a mix of smaller pans.

Why would I pick the flat well over the angled one?
The flat well takes deep, full-size pans for bulk ingredients and bowl-style service, and keeps the top at bench height for the operator. The angled HSP18UBA is for presenting many small pans to customers.

Do you install it?
We supply the equipment only. The counter plugs into a standard 10 amp power point, so no trade is needed to connect it.

See all our food prep stations.

Warranty: Williams 24-month parts and labour warranty from the date of invoice on this self-contained unit, carried out by Williams authorised service agents on the Australian mainland. Warranty repairs must be logged with Williams first. A canopy must be fitted (by Williams or others) or the warranty is affected.