Williams Ruby Roll-In HRMR2T - 2 Door Roll In Fridge 1850mm 2801L

Williams Ruby Roll-In HRMR2T - 2 Door Roll In Fridge 1850mm 2801L

Two doors, two 2/1 GN trolleys and 2801 litres of chilled space: the Williams Ruby Roll-In HRMR2T is a roll-in fridge for hotels, large caterers, central production units and institutional kitchens that chill food by the rack. It holds +1°C to +4°C, is designed for 40°C environments and runs from a 15 amp power point. Like the rest of the Ruby range it is built from cam-locked modular panels assembled on site, with a top-mounted POD refrigeration system and self-closing doors. The fridge version has no internal floor, so trolleys roll in at floor level; the LRMR2T freezer comes with a 90mm insulated floor.

Key features:

• Takes 2 x 2/1 GN trolleys, one per door (trolleys not included), with 1776mm high door openings
• Cam-locked modular panels that fit tightly together, assembled on site
• Top-mounted POD refrigeration system for easy installation and servicing
• Holds +1°C to +4°C and is designed for 40°C environments
• CoolSmart adjustable electronic controller with digital temperature display
• Forced air refrigeration with an anti-corrosive coating on the evaporator coil
• Auto defrost with a waste heat recovery vaporiser, so no external drain
• Two self-closing solid doors with heavy-duty latches and removable balloon-type magnetic gaskets
• Stainless steel interior and exterior (excluding rear and underside)
• Supplied without an internal floor (90mm insulated floor available as an option)

Specifications:

• Model: Williams HRMR2T
• Capacity: 2801 litres, 2 x 2/1 GN trolleys
• Dimensions: 1850 W x 982 D x 2370 H mm (no internal floor)
• Door opening height: 1776 mm
• Weight: 450 kg unpacked
• Temperature range: +1°C to +4°C
• Maximum room temperature: 40°C
• Refrigerant: R134a
• Power: 15 amp plug, 9.0 A running current, 2 m power cable
• Doors: 2 self-closing solid doors (glass view panels optional)
• Finish: stainless steel interior and exterior (excluding rear and underside)
• Construction: modular cam-locked panels, assembled on site
• Refrigeration: top-mounted POD system
• Origin: China/UK

Good to know before you buy:

• Power: needs a 15 amp power point, which has a wider earth pin than a standard outlet. If you do not have one, it must be installed by a licensed electrician. We supply the equipment only.
• Assembly: the cabinet arrives as panels and is assembled on site by your refrigeration contractor or shopfitter. Allow for the 2370mm height plus the POD unit on top.
• Access: assembled, it is 1850mm wide, 982mm deep and 2370mm high, and weighs 450 kg. Delivery is by tailgate truck to the front of your premises.
• Floor: no internal floor is fitted, so trolleys roll in from your floor. The optional 90mm insulated floor must be recessed or used with a ramp.
• Trolleys: not included. Check your 2/1 GN trolleys are under 1776mm high.

Compare similar models:

• Williams LRMR2T: the two-door freezer version, -18°C to -22°C
• Williams HRMR1T: single door for one trolley, 905mm wide, 10 amp plug
• Williams HRMR3T: three doors for three trolleys, 2795mm wide
• Williams HG2SSHC: Garnet two-door upright with shelves and slides for 2/1 GN pans, 1270 litres

Common questions:

Can each door be used independently?
Each door opens onto its own trolley bay, so you can load or unload one rack while the other stays shut. The cabinet runs as one refrigerated space on a single controller.

What does the POD refrigeration system mean?
The compressor, condenser and evaporator are packaged in a unit that sits on top of the cabinet. It is designed to be removed for servicing without dismantling the cabinet.

Do you install it?
No. We supply the equipment only. Assembly of the panels is done on site by your contractor, and the 15 amp outlet, if you need one fitted, is a job for a licensed electrician.

See all our upright fridges.

Warranty: Williams 24-month parts and labour warranty from the date of invoice on this self-contained unit, carried out by Williams authorised service agents on the Australian mainland. Warranty repairs must be logged with Williams first.