Williams Ruby Roll-In LRMR1T - 1 Door Roll In Freezer 905mm 1237L

Williams Ruby Roll-In LRMR1T - 1 Door Roll In Freezer 905mm 1237L

The Williams Ruby Roll-In LRMR1T is a single door roll-in freezer for one 2/1 GN trolley, so a catering, hotel or production kitchen can freeze a full rack of trays without unloading it. It holds -18°C to -22°C in a 1237 litre cabinet, is designed for 40°C environments and plugs into a standard 10 amp power point. The freezer is fitted with a 90mm insulated floor, which is why it stands 2460mm high (90mm taller than the HRMR1T fridge) and needs to be recessed into the floor or used with a ramp. It is built from cam-locked modular panels assembled on site, with a top-mounted POD refrigeration system.

Key features:

• Takes 1 x 2/1 GN trolley (trolley not included), with a 1776mm high door opening
• 90mm insulated floor fitted as standard on freezer models
• Cam-locked modular panels that fit tightly together, assembled on site
• Top-mounted POD refrigeration system for easy installation and servicing
• Holds -18°C to -22°C and is designed for 40°C environments
• CoolSmart adjustable electronic controller with digital temperature display
• Forced air refrigeration with an anti-corrosive coating on the evaporator coil
• Auto defrost with a waste heat recovery vaporiser, so no external drain
• Self-closing solid door with a heavy-duty latch and a removable balloon-type magnetic gasket
• Stainless steel interior and exterior (excluding rear and underside) with a stainless steel internal floor

Specifications:

• Model: Williams LRMR1T
• Capacity: 1237 litres, 1 x 2/1 GN trolley
• Dimensions: 905 W x 982 D x 2460 H mm (including 90mm internal floor)
• Door opening height: 1776 mm
• Weight: 300 kg unpacked
• Temperature range: -18°C to -22°C
• Maximum room temperature: 40°C
• Refrigerant: R404a
• Power: 10 amp plug, 6.5 A running current, 2 m power cable
• Door: 1 self-closing solid door (glass view panel optional)
• Finish: stainless steel interior and exterior (excluding rear and underside), stainless steel internal floor
• Construction: modular cam-locked panels, assembled on site
• Refrigeration: top-mounted POD system
• Origin: China/UK

Good to know before you buy:

• Floor: the 90mm insulated floor sits above your floor level, so Williams requires the cabinet to be recessed or used with an external ramp. A metal checker plate ramp is available as an option.
• Assembly: the cabinet arrives as panels and is assembled on site by your refrigeration contractor or shopfitter. We supply the equipment only.
• Access: assembled, it is 905mm wide, 982mm deep and 2460mm high, and weighs 300 kg. Allow ceiling height for the POD on top. Delivery is by tailgate truck to the front of your premises.
• Power: plugs into a standard 10 amp power point with a 2 m cable.
• Trolley: not included. Check your 2/1 GN trolley is under 1776mm high.

Compare similar models:

• Williams HRMR1T: the fridge version, +1°C to +4°C, supplied without a floor
• Williams LRMR2T: two-door freezer for two trolleys, 1850mm wide, 15 amp
• Williams LRMR3T: three-door freezer for three trolleys, 2795mm wide
• Williams LRG1: Garnet Roll-In freezer for a smaller 1/1 GN trolley, one-piece cabinet made in Australia

Common questions:

Why does the freezer need a ramp or a recess?
Freezer models are fitted with a 90mm insulated floor so they can hold -18°C to -22°C efficiently. That raises the entry 90mm above your floor, so the cabinet is either set into a recess or fitted with a ramp for the trolley.

Is the trolley included?
No. The LRMR1T is built around a standard 2/1 GN trolley, which you supply. Ask us if you need help choosing one.

Do you install it?
No. We supply the equipment only. The panels are assembled on site by your contractor, and the finished cabinet plugs into a standard 10 amp power point.

See all our upright freezers.

Warranty: Williams 24-month parts and labour warranty from the date of invoice on this self-contained unit, carried out by Williams authorised service agents on the Australian mainland. Warranty repairs must be logged with Williams first.